Everyone knows that paint buckets are difficult to clean after use. The result is to turn it into garbage, so if it can be cleaned up well, it can still be used. Then let me introduce you to the cleaning method below. Coating barrels are generally made by molding methods, and different molding methods often have a greater impact on the performance and cost of the product. Plastic-sealed containers are often used in various plastic packaging containers. Some plastic-sealed barrels can be cleaned manually, while others need to be used. Mechanical cleaning methods can be divided into intermittent cleaning methods and continuous cleaning methods. Batch cleaning: Put the plastic airtight bucket into the tank, use a stirrer such as sand and soil to remove the dirt on the plastic airtight bucket, and make it sink to the bottom of the tank.
Some materials such as wood chips and paper are not easy to sink and require further purification. There are also some substances that will stick together under special conditions, such as printing inks, labels, etc. They can be picked out, crushed, and then immersed in an alkaline aqueous solution. After a certain period of time, it can be completed in the cleaning process. . Continuous cleaning: waste plastic is transported to the plastic grinder via a conveyor belt. It is coarsely crushed, and then transported to a larger separation area, where the gravel is sunk into the bottom of the water and transported out regularly. Floating matter is transported to the wet mill by the conveyor roller, and then enters the sedimentation tank. Any objects heavier than water are separated, even very small particles are no exception, and a good cleaning effect can be obtained.
The above are some introductions on how to clean the paint bucket if it is not clean. You can find out if you have any questions or needs, you can directly leave your needs and contact information on the website, and we will contact you in time!